| After-sales Service: | 1year |
|---|---|
| Warranty: | 1year |
| Max Diameter of Workpiece: | <500mm |
| Samples: |
|---|
| Customization: |
|---|
|
Shipping Cost:
Estimated freight per unit. |
about shipping cost and estimated delivery time. |
|---|
| Payment Method: |
|
|---|---|
| Initial Payment Full Payment |
| Currency: | US$ |
|---|
| Return&refunds: | You can apply for a refund up to 30 days after receipt of the products. |
|---|
Suppliers with verified business licenses
Audited Supplier The unsaturated triaxial instrument is an extension of the traditional triaxial test. It is mainly used to study the soil (layer) saturation and unsaturated characteristics under the migration of soil groundwater, rainfall, snow and ice melting, and to simulate the stress state of the on-site soil layer. Matrix suction and seepage process in saturated and unsaturated soil state, can do triaxial consolidation, shear, rheology, rebound and other tests.
Automatically collect the axial force, deformation, stress-strain, pore water pressure and pore air pressure of the standard test soil unsaturated state soil sample, display, record, store and draw relevant curves and data in real time for research analysis and evaluation.
The pressure chamber is divided into built-in or external sensor options (built-in sensors reduce friction and are not affected by confining pressure.
1. Clay board with gas resistance value: 0~0.5Mpa (different gas resistance value can also be selected)
2. Shear force value: real-time record and time data value, and shear deformation data value, shear force value and pore pressure data value.
3. The image process of shear force value and deformation data.
4. Computer control
| Axial shear force | 0-10KN; 0-30KN precision 0.05% optional |
| Shear deformation | 0~20mm±0.01mm |
| Axial speed | 0.001 ~ 4.5mm/min, stepless speed regulation can be set arbitrarily |
| Stress rate | 10N~10KN/S; 10N~30KN/S can be adjusted arbitrarily |
| The constant force can be set according to the needs; the emergency stop can be set. | |
| Axial rising distance | 0-90mm |
| Pore pressure | 0-1Mpa±0.01Mpa Real-time display of the storage record time curve |
| Air pump | 0-1.0Mpa, voltage 380V±10V, power 2.2KW |
| Back pressure water | 0-1Mpa±0.01Mpa can be set arbitrarily (water inflow can be measured; displacement can be collected and recorded in real time and the relationship between time and displacement can be drawn in graphs) |
| Back pressure gas | 0~500kPa±0.02 level, adjustable and constant |
| Confining pressure | 0-2Mpa±0.01Mpa can be set arbitrarily (water inflow can be measured) |
| Soil size | Φ39.1X80mm Φ61.8X120mm (optional) |
| Accessories | Latex mold, saturation mold, mold bearing cylinder, compaction equipment and other accessories |
| Clay board with resistance to air intake value | 0-500Kpa, air-resistant pressure permeable and airtight clay board. In order to measure the matrix suction of the soil sample, a clay board with high air intake value is installed at the bottom of the pressure chamber. The clay board has the following characteristics : When the clay plate is fully saturated, a water film is formed inside the clay plate because there are many uniform fine pores inside the clay plate. Before use, the clay board should be soaked in water or saturated in a vacuum saturation device, and the water seepage should be measured once under the pressure of 10KPa during the test of the water-soaked clay board. |
| Function selection | tangent modulus, secant modulus, rebound modulus, K0 lateral pressure coefficient. |
| Volume change (optional) | 0~50ml is automatically collected and calculated by sensor data |
1. Warranty 1 year of replacement and return.
2. Providing factory visit and study, technical training.
Suppliers with verified business licenses
Audited Supplier 
){kind=link}
){kind=link}