Manual 63.5kg Heavy Dynamic Cone Penetrometer DCP Testing Equipment

• Customization: Available
• After-sales Service: 1year
• Warranty: 1year
• Model NO.: C100
• Accuracy Grade: 0.5
• Load Way: Mechanical Load
• Loading Method: Dynamic Load
• Display: Needle
• Control: Manual Control
• Weight: 0-100Kg
• Probe Diameter: 40mm/74mm
• Probe Cone Angle: 60
• Hammer Mass: 10kg/63.5kg
• Drop Distance: 50cm/76cm
• Transport Package: Wooden Case
• Trademark: zealchon
• Origin: China
• Production Capacity: 9999
• Package Size: 120.00cm * 25.00cm * 20.00cm
• Package Gross Weight: 50.000kg

Product Description

Product Description

C100 Dynamic Cone Penetrometer YX-2

It is used to determine the allowable bearing capacity of various types of soil, and can find out the uniformity of the soil layer in the horizontal and vertical directions, determine the position of the pile foundation holding layer and estimate the bearing capacity of the single pile.
It is a field test method that uses a certain hammering energy to drive a certain specification of a cone probe into the soil, and determines the engineering properties of the soil layer according to the difficulty of entering the soil.
The discriminant indicator uses the number of hammer hits penetrated into a certain depth. It is the main means of coarse-grained soil foundation survey and testing.

Product Parameters

 

Type		Light	Heavy
Probe specifications	Diameter	40mm	74mm
	Cross-sectional area	12.6cm^2	43cm^2
	Cone angle	60°	60°
Drop weight	Hammer mass	10kg	63.5kg
	Drop distance	50cm	76cm
Probe diameter		25mm	42mm
Test index N		Penetration 30cm hammer number N10	Penetration 10cm hammer number N63.5
Applicable to soil		shallow fill,sand,silty clay clay	Sanravel soil below medium density and soft rock

The rod length correction factor for dynamic contact is α
 

Rod length(m)	≤1	2	3	4	5	6	10	12	15
α	1.00	0.96	0.90	0.85	0.83	0.81	0.76	0.75	0.74

Note: The data in this table is measured by the automatic decoupling method.

 

Ministry of Construction Standard N63.5 rod length correction coefficient α

 

L           α N63.5	≤2	4	6	8	10	12	14	16
1	1.00	0.98	0.94	0.93	0.90	0.87	0.84	0.81
5	1.00	0.96	0.93	0.90	0.86	0.83	0.80	0.77
10	1.00	0.95	0.91	0.87	0.83	0.79	0.76	0.73
15	1.00	0.94	0.89	0.84	0.80	0.76	0.72	0.69
20					0.77	0.73	0.69	0.66

 

Note: L--- Probe rod length (m);

         N63.5--- Measured number of heavy dynamic contact (hits/10cm);

         α value --- measured by a free drop weight.

 

 

 Ministry of Railways standard N63.5 rod length correction factor α
 

L       α N63.5	≤2	4	6	8	10	12	14	16	18	20
5	1.00	0.96	0.93	0.90	0.88	0.85	0.82	0.79	0.77	0.75
10	1.00	0.95	0.90	0.86	0.83	0.79	0.76	0.73	0.70	0.67
15	1.00	0.93	0.88	0.83	0.79	0.75	0.71	0.67	0.63	0.59
20	1.00	0.92	0.85	0.80	0.75	0.70	0.66	0.62	0.57	0.53
25	1.00	0.90	0.83	0.77	0.72	0.67	0.62	0.57	0.53	0.48
30	1.00	0.89	0.81	0.75	0.69	0.64	0.58	0.54	0.49	0.44
35	1.00	0.87	0.79	0.73	0.67	0.61	0.56	0.51	0.46	0.41
40	1.00	0.86	0.78	0.71	0.64	0.59	0.53	0.48	0.43	0.39
50		0.84	0.75	0.67	0.61	0.55	0.50	0.45	0.40	0.36

 

Note: L--- Probe rod length (m);

N63.5-- Measured number of heavy dynamic contact (hits/10cm); 

 

 

 Ministry of Metallurgy, Nonferrous Metals Corporation standard N63.5 rod length correction coefficient α

 

L       α N63.5	≤2	4	6	8	10	12
5	1.00	0.96	0.93	0.90	0.88	0.85
10	1.00	0.95	0.90	0.86	0.83	0.79
15	1.00	0.93	0.88	0.83	0.79	0.75
20	1.00	0.92	0.85	0.80	0.75	0.70
25	1.00	0.90	0.83	0.77	0.72	0.67
30	1.00	0.89	0.81	0.75	0.69	0.64
35	1.00	0.87	0.79	0.73	0.67	0.61
40	1.00	0.86	0.78	0.71	0.64	0.59
≥50	1.00	0.84	0.75	0.67	0.61	0.55

 

Detailed Photos

Services

1. Warranty 1 year of replacement and return.
2. Providing factory visit and study, technical training.

Trade Shows

Packaging & Shipping

Certifications